Skip to content

HƯỚNG DẪN MUA HÀNG qua Điện thoại / Email

Website đang trong giai đoạn xây dựng. Thông tin liên hệ: tổng đài 0898.332.898 hoặc E-mail: Sales@nguyenxuong.com

HƯỚNG DẪN MUA HÀNG qua Điện thoại / Email

. Thông tin liên hệ: tổng đài 0898.332.898 hoặc E-mail: Sales@nguyenxuong.com

Disconnects > Disconnects

The vibration resistant female disconnect is made of brass and is tin-plated. It is barrel insulated in yellow vinyl housing. It has a tab size of 0.250 x 0.032" (6.3 x 0.8 mm) and supports a wire range of 12-10 AWG (4.0-6.0 mm²). It is 0.95" (24.1 mm) lo

by Panduit
11.400₫
(Giá chưa VAT).
Mã kho: PAK930

Mã nhà sản xuất: DV10-250-2K

Quy cách đóng gói: 2,000

Liên hệ để có giá tốt (Vietnam: 0898.332.898,  E-mail: SKF@nguyenxuong.com)

Wire Termination / Terminals Terminal Kits / Disconnects: Panduit DV10-250-2K

MÔ TẢ SẢN PHẨM

The DV10-250-2K Reel Smart™ Disconnect is a continuously molded female disconnect with vinyl insulated barrel and a funnel entry. The continuously molded design allows for consistent and reliable processing through Panduit applicators. The internal wire stop assures proper wire insertion length into

_THÔNG SỐ KỸ THUẬT:

Disconnect Type Female Disconnect
Insulation Material Vinyl
Insulation Type Barrel Insulated
Maximum Wire Size (AWG) #10
Minimum Wire Size (AWG) #12
Wire Strip Length (In.) 11/32
Wire Strip Length (mm) 8.7
Tab Size (In.) 0.250 x 0.032
Tab Size (mm) 6.3 x 0.8
Maximum Voltage (V) 600
Base Material Brass
Finish/Coating Tin-Plated
Color Code Yellow
Barrel Type Funnel
Flammability Rating UL94V-0
Sub Brand Reel Smart™
Maximum Metric Conductor Size (mm²) 6
Minimum Metric Conductor Size (mm²) 4
Maximum Wire Insulation Diameter (In.) 0.23
Maximum Wire Insulation Diameter (mm) 5.8
Overall Height (In.) 0.12
Overall Height (mm) 3
Overall Length (In.) 0.95
Overall Length (mm) 24.1
Overall Width (In.) 0.29
Overall Width (mm) 7.4
Tongue Angle Straight
Packaging Type Reel
Product Type Disconnects on a Reel
For Use With Crimp press with CA9 (CD9-3B) or CA-800EZ (CD-800-3) applicator
Maximum Voltage (kV) 0.6
Part Features • Continuously molded design provides reliable, consistent performance through the applicator for a high quality termination every time • Disconnect can be inserted and removed from the male tab without the use of tools for lower installed cost • Internal barrel serrations assure good wire contact and maximum tensile strength • Internal wire stop assures proper length of insertion into terminal barrel, providing a higher quality connection • UL Flammability UL 94V-0, maximum insulation temperature 221°F (105°C) • UL and CSA rated up to 600 V per UL 310, where applicable